series 1-dc ? mosfet output ? ratings from 60a to 100a @ 100 vdc ? dc control ? relays are easily paralleled for higher-current applications product selection control voltage 60a 80a 100a 3.5-32 vdc d1d60 d1d80 D1D100 output specifications (1) description d1d60 d1d80 D1D100 operating voltage [vdc] 0-100 vdc 0-100 vdc 0-100 vdc maximum off-state leakage current @ rated voltage [ma] 0.1 0.2 0.3 maximum on-state resistance @ rated current [rds-on][ohms] 0.010 0.008 0.005 maximum load current (3) [adc] 60 80 100 minimum load current [ma] 5 5 5 maximum surge current [adc] (10ms) 180 220 330 maximum on-state voltage drop @ rated current [vdc] 0.6 0.7 0.5 thermal resistance juncti on to case (rjc) [c/w] 0.6 0.47 0.32 input specifications (1) description dc control control voltage range 3.5-32 vdc minimum turn-on voltage 3.5 vdc minimum turn-off voltage 1.0 vdc maximum input current 1.6 ma (5 vdc), 28 ma (32 vdc) nominal input impedance see note 4 maximum turn-on time [ sec] 300 maximum turn-off time [msec] 1.0 general specifications description parameters dielectric strength, input/output/base (50/60hz) 2500 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 50 pf ambient operating temperature range -30 to 80c ambient storage temperature range -40 to 125 c weight (typical) 3.0 oz (86.5g) encapsulation thermally conductive epoxy terminals screws and saddle clamps furnished, unmounted recommended terminal screw torque range: 6-32 screws - 10 in lbs. 8-32 and 10-32 scre ws -20 in. lbs. (screws dry without grase) general notes 1) all parameters at 25c and per section unless otherwise specified. 2) dielectric strength and insulation re sistance are measured between input and output 3) heat sinking require d, see derating curves. 4) input circuitry version incor porates active current limiter.
mechanical specifications thermal derate information agency approvals designed in accordance with the requirements of iec 62314 rev. 120811
annex - enviromental information
|
